Register 1
Vehicle set up: Close all doors/bonnet/boot THEN turn the ignition
on. (Remote* = press bottom button on remote this many times)
Activate any additional sensors
fitted.
System arms automatically 60
seconds after exit. The doors
will not lock.
If disarmed and a door not
opened within 60 seconds, the
alarm will re-arm and re-lock.
Door lock
pulse on
alarm trigger
Sends a door lock pulse on
alarm trigger. This can help
frustrate a thief’s attempt to
enter the vehicle (a thief picks
the door lock which triggers the
alarm and the doors
immediately re-lock).
6
SELECT
the level
required.
Press remote 9 times to enter
mode then turn ignition to OFF.
There are 8 levels of adjustment
(factory setting 6).
Pressing the remote once will
increase the sensitivity by 1
level i.e. to 7. The LED will flash
7 times to confirm level 7.
Pressing the remote again will
increase the sensitivity to level
8 (max).
Pressing the remote again will
return the adjustment to level 1
(least sensitive).
Once the level is set, turn the
ignition ON to exit this mode.
Kommentare zu diesen Handbüchern