AVS 9000 Bedienungshandbuch PDF herunterladen (Seite 17)

5. Immediately press and hold the bottom button on the new

remote for at least four seconds.

6. Turn the ignition off.

7. The new remote is now coded in. Test it by arming/disarming

the system with the new remote.

Notes:

• If you wish to code in more than one remote repeat the

process for each new remote

• If you need to delete a remote please see your AVS dealer

Programming features

Programming features are set up by your AVS installer during

installation. We recommend consulting your installer before

attempting to change the programming features as damage to your

vehicle or the alarm may occur.

To turn programming features on or off

1. Find the programming register (1-3) for that feature. (Example:

passive arming is located in register 1).

2. Set the vehicle up as described for that register. (Example: for

3. Press the bottom button on the remote the number of times

indicated for that feature. (Example: 4 x shock sensor).

4. Turn the ignition off.

5. The system will then chirp in order the number of times for

each feature that is turned on. (Example: it will miss the shock

sensor code of four chirps because that feature has just been

disabled).

Tips:

1. The alarm must be disarmed prior to making programming

changes.

2. If your vehicle has interior light delay wait until the light fades

out before turning the ignition on in step 2.

3. Feature 9 is excluded from the confirmation chirps on all

registers.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Keine Kommentare

AVS 9000 Bedienungshandbuch Seite 17